| |
|
MC100FX-SC2
Media Converter
- Converts speed and media type
- Built-in fiber transceiver module with SC connector
- Auto-negotiating Ethernet port (Speed, Half/Full Duplex)
- Auto-crossover Ethernet port(support Auto MDI/MDI-X)
- Build in Link Loss Forwarding Technology to notify the peer link if a link goes down
- Easier configuration by DIP Switch
- Switching architecture supports store and forward mode
- LED Status Display
Benefits
| |
Easy Installation
With Auto-negotiating Ethernet port function, MC100FX-SC2 / 30 RJ-45 port can auto negotiating transmission speed and mode with peer device. With Auto-crossover Ethernet port function, MC100FX-SC2 / 30 eliminates probable problem of circuits missed match by auto-sensing MDI/MDIX function. Based on these functions, MC100FX-SC2 / 30 can easy to connect directly with either a switch, NIC (Network Interface Card) or the Gigabit Ethernet device via a UTP/STP cable.
Easy Troubleshooting
With Link Loss Forwarding mechanism, when one link down detected on the Ethernet RJ-45 port will force a link down on the fiber port. The fiber uplink port will stop transmitting and turning off as soon as the remote link is down. Transparent link status is delivered by Link Loss Forwarding mechanism which made network troubleshooting easier and faster. |
|
Specification
| |
System Specifications
Standard Compliance
- IEEE802.3 10BASE-T
- IEEE802.3u 100BASE-TX
- IEEE802.3x Flow Control and Back pressure
Connector & Interface
- Fiber: Duplex SC
- RJ-45 Port: CAT-5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-Negotiation Function Support
Switch Architecture
Fiber Parameters
- Fiber Core
- Multi-Mode (62.5/125um, 50/125um)/Single-Mode (8/125um, 10/125um)
- Wavelength:
- 1310nm (Multi-mode ) / 1310nm (Single-mode)
- Fiber Distance:
- Multi-Mode Fiber (2KM) / Single-Mode Fiber (30 KM)
Transparent Packet
- 64 to 1518 Bytes for Non-VLAN Ethernet packet
Link Loose Forward
- TX to Fiber: If TX port link down, then converter will forced fiber to link down.
- Fiber to TX: If Fiber port link down, the media converter will forced TX port to link down.
DIP Switch
- DIP Switch 1: UTP auto-Negotiation / 100Mbps Full Duplex mode
- DIP Switch 2: Fiber Full/Half duplex
- DIP Switch 3: LLF ( Link Lose Forwarding ) Disable / Enable
- DIP Switch 4: Switch converter / Pure converter mode
LED Indication
- Module: PWR,100, LNK/Act, FDX/COL
Power
- Stand-alone (external adapter):DC 9V / 0.7A
Dimension
- 119 (W) x 85 (D) x 26 (H) mm
Operation Environment
- Operating temperature: 0oC ~ 45oC
- Storage temperature: - 10oC ~ 70oC
- Operating humidity: 10% ~ 90%, non-condensing
Certifications
EMC
- FCC Part15 (Class A)
- CE EMC (Class A)
Safety
|
|
|
|
|
